Screen Monitor 886x590 1 How to fix screen problems in Windows 10 3

How to fix screen problems in Windows 10

Here are some examples of this problem:

The Windows 10 screen flashes on and off – your screen may not constantly flash, but only in certain time intervals.
Windows 10 menu starts flashing – there is a possibility that your screen will flash only when you open the menu start.
Windows 10 black screen with cursor – black screen usually appears if you have two monitors. Simply remove one of your monitors, and the problem must be lost.
Windows 10 black screen without cursor – in some cases, you won’t even see the cursor when the black screen appears. This can be caused by your BIOS configuration. To fix the problem, you need to check the BIOS configuration and make sure you only use special charts.
Windows 10 White Screen Crash – If your computer is jammed after a white screen, it is possible that your graphics card is damaged, so be sure to test it and replace it if needed.

How do you handle screen problems on Windows 10?

  • Black screen during Windows 10 installation
  • Check whether your driver is compatible
  • Change Refresh Rate Monitor

Black screen during Windows 10 installation

BIOS How to fix screen problems in Windows 10 5
  • Reactivate your computer and press the button to enter the BIOS (maybe del)
  • Go to the sophisticated BIOS feature (or something like that)
  • Select video configuration or internal graphics
  • Look for the main video adapter option.
  • Select PCI to switch to your PCI graphics card
  • Save changes and exit the BIOS.

This problem usually does not appear on ordinary computers. Everyone who reported the black screen during the Windows 10 installation also said that they had two graphics cards or two monitors connected to the computer.

So the solution is very simple, just unplug the second monitor or remove the second graphics card, and you must be able to install Windows 10 normally.

While the second monitor termination is easy (you only need to pull out the cable), to deactivate the second graphics card (maybe integrated), you have to go to the BIOS.

In most cases, people tell us that one of these methods works, and I hope it will work for you too. However, if you have a black screen problem after you install Windows 10, check the solution below.

Blinking screen in Windows 10

2.1. Check whether your driver is compatible

  • Users experience driver compatibility problems since updating Windows 10 because many graphics cards longer still do not have compatible drivers.
  • Also, even if there are Windows 10 drivers that are compatible with your graphics card, maybe you don’t download them.
  • To reach the device manager and see if your driver is updated.

2.2. Change Refresh Rate Monitor

  • Right-click on the desktop and click on the display settings
  • Open advanced display settings
  • Under related settings, go to display the adapter property.
fix screen problems 1 How to fix screen problems in Windows 10 7
  • Open the monitor tab and select another refresh rate from the refresh level screen:
  • Click OK.

Some people report that reducing the speed of the refresh monitor helps them to get rid of the flashing screen in Windows 10. So it doesn’t hurt if we try this solution too.

Leave a Comment

Your email address will not be published. Required fields are marked *